1. Home
  2. Smart meter field operations
  3. Pole inspection app

Solution

Utility pole inspection app for field crews, offline

Last updated

PIEBENCH runs utility pole inspections as a no-code workflow. Inspectors use Scout, an offline Android app, to scan the pole tag, record GPS, rate each component from a checklist and attach photos, with or without signal. Supervisors review each inspection, and the office sees poles by condition and priority. You build the inspection form yourself in the workflow builder.

Who it's for: distribution utilities, co-ops and contractors running pole inspection programs, and the line crews and inspectors who walk the routes. The workflow builder that creates the inspection form is part of the Pro plan.

What goes wrong with paper and spreadsheets

A pole inspection program covers thousands of poles a year, most of them far from an office and many far from a cell tower. On paper or in a spreadsheet, the same problems come up:

  • The pole number is misread, so the finding attaches to the wrong pole.
  • The location is a street name, not a GPS point, so the follow-up crew can't find it.
  • "Cracked crossarm" is written three different ways, so nobody can count how many there are.
  • Photos sit on a phone camera roll, unlinked to the pole.
  • A priority defect waits weeks, because the sheet is typed up at the end of the month.

How a pole inspection runs in PIEBENCH

  1. Load the poles. Import poles as service points by CSV, with their ID and coordinates, or pull them from your GIS or asset system through Connectorly. Each pole becomes a point on the map.
  2. Build the inspection form. In the no-code workflow builder, add the fields your program uses. A typical form is outlined below. No developer and no app release are needed.
  3. Assign routes. Work orders go to inspectors or crews, so each person's poles are on their phone before they leave.
  4. Inspect, offline. At each pole, the inspector scans the tag, records GPS, works through the checklist and takes photos. Everything saves on the phone.
  5. Review. A supervisor checks each inspection and approves it, or rejects it with a note if a photo or rating is missing.
  6. Act on findings. Smart Views list poles by condition and priority, so the worst ones go to the maintenance schedule first.

A typical pole inspection form

FieldField type in the builderExample
Pole IDBarcode, with a text fallbackScanned from the pole tag
LocationGPSRecorded with its accuracy
Pole material and classDropdownWood, steel, concrete
Overall conditionDropdownGood, fair, poor, reject
Components checkedChecklistCrossarm, insulators, guy wires, grounding, hardware
Defects foundCheckbox and dropdownGround-line decay, woodpecker holes, leaning pole
Vegetation clearanceDropdownClear, trim needed, urgent
PriorityDropdownRoutine, next cycle, urgent
PhotosPhoto, requiredFull pole, defect close-up
NotesTextAnything the dropdowns don't cover
Attachments countedCounterNumber of attachments on the pole

Make any field required, and the inspection can't be saved without it. Your program's own standards decide the fields and ratings, and you can change them mid-cycle: phones pick up the new version on their next sync.

Built for walking the line

Offline-first. Scout stores the day's poles and every inspection in a database on the phone. There is no offline mode to switch on, and no fixed limit on how many inspections wait to sync beyond the phone's free storage. See the offline field app page.

Photos that upload on weak signal. Photos are compressed on the phone before upload.

Cheap, rugged phones are fine. Scout runs on Android 7.0 and later and is designed for gloved hands and bright sun.

Accountability. Inspectors check in for duty with a selfie and GPS, and supervisors can see on-duty staff live. Each inspection carries its timestamp and GPS fix, so you know it was done at the pole. See field attendance.

Getting findings to the right system

Approved inspections can be sent to your asset, GIS or work management system through Connectorly, which connects to REST APIs, OAuth-protected services and SQL databases. Work orders also export to CSV. Integrations are part of the Pro and Enterprise plans. See integrations.

Check the fit

Pole inspection has its own specialist tools, some with structural analysis, load calculations or treatment tracking built in. PIEBENCH is a general field workflow platform, so it is a good fit when you need a clean, offline inspection record, review and follow-up lists, and less so when you need engineering calculations inside the app. Scout is Android-only, and there is no ready-made pole inspection template today: you build the form in the no-code workflow builder.

Pro is $499/month, with users included. Plans start at $199/month, and the free trial needs no card. See pricing.

Built to integrate with your systems

HES, MDM, SAP IS-U, Oracle CC&B and billing systems, over REST, OAuth or a direct SQL connection. How integrations work

Questions buyers ask

What is the best offline app for utility pole inspections?

One that saves every inspection on the phone, scans the pole tag, records GPS, uses fixed ratings instead of free text, makes photos required, and lets a supervisor send an inspection back. PIEBENCH does this with its Android app and no-code workflow builder. Specialist pole tools add engineering analysis if you need it.

Can inspectors work without cell signal?

Yes. The day's assigned poles sync to the phone while it has signal. Inspections, GPS fixes and photos are saved on the phone and upload automatically when signal returns. A restart doesn't lose saved inspections.

Does PIEBENCH have a pole inspection template?

Not as a ready-made template. You build the inspection form in the no-code workflow builder on the Pro plan, using barcode, GPS, dropdown, checklist, photo, text and counter fields. Most programs set it up from their existing paper form.

Can we load our existing pole list?

Yes. Import poles as service points by CSV with their ID and coordinates, or pull them from a GIS or asset system through Connectorly on the Pro plan. Each pole then appears on the map and can be assigned to inspectors.

How do we see which poles need work?

Use Smart Views. Filter approved inspections by condition, defect or priority, and save the view, for example "urgent poles this week by district". Supervisors open it each morning to schedule repairs.

Can inspectors capture a signature?

Not yet. The workflow builder does not have a signature field today. Inspections are tied to the signed-in inspector, with a timestamp and GPS fix, which records who did the inspection and where.

Free trial · no card

See it with your own crew

Start a free trial, or ask us for a walkthrough of your rollout.

Related