1. Home
  2. Compare
  3. PIEBENCH vs KoboToolbox

Comparison

PIEBENCH vs KoboToolbox

Last updated

KoboToolbox is free, nonprofit data collection software built for humanitarian and development work, with an offline Android app, web forms and a review status on each submission. PIEBENCH is built for meter installation: work orders, a ready installation template, duplicate serial checks, approvals with notes to the installer, attendance and daily counts per installer. Choose by whether you need surveys or an installation operation.

How we compared. PIEBENCH is our product, so read this with that in mind. Competitor details come only from their public websites as checked on 17 November 2026, and we link to each source. We have not tested competitors' products hands-on. If something here is out of date, tell us and we will correct it.

The short version

Choose PIEBENCH if…Choose KoboToolbox if…
The jobYou install or replace meters with a team, every dayYou run surveys or one-off data collection
Your organisationA contractor, installation agency, AMISP or DISCOMA nonprofit, research or humanitarian team
BudgetA flat monthly fee from $199/month suits youYou want to start free on the Community Plan
What happens after captureJobs need approval, counting per installer and sync to HES or billingExporting or analysing the data is enough

About KoboToolbox

KoboToolbox is hosted and maintained by Kobo, an international nonprofit. Its about page says it makes data accessible to social impact organisations, and calls it the most widely used data collection tool for humanitarian action, development, peacebuilding, human rights and environmental protection. The tools are free under the Community Plan, with paid Professional and Teams plans for high-volume work (usage limits).

Data is collected in KoboCollect, a free, open-source Android app whose offline capabilities its documentation describes as ideal for fieldwork. KoboCollect works only on Android phones and tablets, and newer versions need Android 8.0 or higher. Web forms also work in a browser, and support offline collection once the form has been opened and cached. Forms are built in the Formbuilder or as XLSForm spreadsheets, with skip logic, validation rules, media and GPS questions.

Each submission can be given a validation status of approved, not approved or on hold, and the "validate submissions" permission can be granted separately from editing. REST Services send each new submission to an external server as JSON or XML. Plans meter submissions and storage per billing cycle.

About PIEBENCH

PIEBENCH is a field operations platform for smart meter rollouts, built for AMISPs, installation agencies, contractors and DISCOMs. Installers use Scout, an offline-first Android app. Work is assigned as work orders tied to service points, reviewed in an approval queue, and counted per installer, team and agency, with attendance alongside. Connectorly sends approved data to HES, MDM and billing systems.

Feature comparison

PIEBENCHKoboToolbox
Built forSmart meter installation and field operationsData collection for social impact organisations
Offline appScout, Android 7.0 and laterKoboCollect, Android only (newest versions need Android 8.0), plus cached web forms
FormsReady Meter Installation and Consumer Indexing templates; no-code builder on ProFormbuilder or XLSForm, with skip logic and validation
New meter serialBarcode scan, voice or typedNot listed in the pages we read
Duplicate serial checkRefused within a projectNot listed
Work orders and assignmentYes, to teams and contractorsNot listed
ReviewApproval queue; rejection note goes to the installer's phone; auto-approval rules on ProValidation status per submission: approved, not approved, on hold
Daily count per installerSmart Views by installer, team and agency; leaderboard on ProNot listed
AttendanceSelfie and GPS check-in, stationary-agent alertsNot listed
IntegrationsConnectorly over REST, OAuth or SQL to HES, MDM and billing; CSV exportREST Services push new submissions as JSON or XML; API
Price (as of 17 November 2026)Free trial; paid plans from $199/monthFree Community Plan; paid Professional and Teams plans (pricing)

"Not listed" means we could not find the feature in KoboToolbox's documentation. It does not mean it can't be done, for example with a custom form.

Where the difference shows up on an installation project

Surveys versus jobs. KoboToolbox is built around forms and submissions. That suits a consumer survey well: send out a form, collect thousands of responses, analyse them. An installation project is built around jobs. Each meter swap is assigned to a person, has to be done at a specific premises, is checked by a supervisor, and counts towards a daily total someone has to report. PIEBENCH starts from the job.

Review that reaches the installer. KoboToolbox lets a reviewer mark a submission approved, not approved or on hold. In PIEBENCH, a rejection carries a note that goes back to the installer's phone, so they know to retake the seal photo before they leave the area. On installation work, that loop is where most rework is saved.

Catching the same meter twice. On a rollout, the most expensive data mistake is a serial recorded twice, or a wrong digit. PIEBENCH scans the serial from the barcode and refuses a serial already used in the project. With a general form tool, you would add that check yourself, or find it later during commissioning.

Counting people's work. Contractors need to know how many meters each installer and each sub-agency did today, and pay on approved work. PIEBENCH ties every job to the installer, team and contractor. KoboToolbox data can be analysed for this, but it is your analysis to build.

Cost. KoboToolbox is free to start on the Community Plan, which matters for a nonprofit or a small pilot. Check its submission and storage limits against your expected installations per month.

When to choose KoboToolbox instead

Choose KoboToolbox if you are a nonprofit, research or humanitarian team, if you mainly need surveys or one-off data collection, if you are comfortable building forms in the Formbuilder or XLSForm, or if starting free matters more than ready-made installation logic. For a pre-installation consumer survey, it is a strong choice.

When to choose PIEBENCH

Choose PIEBENCH if you install or replace meters as a business, with installers, supervisors and targets: a ready installation template, work orders, duplicate serial checks, approvals with notes, attendance and daily counts per installer, plus sync to HES or billing. See the meter installation record app for the installer's view, the meter installation tracking app for the contractor's, or pricing.

Built to integrate with your systems

HES, MDM, SAP IS-U, Oracle CC&B and billing systems, over REST, OAuth or a direct SQL connection. How integrations work

Questions buyers ask

Can I use KoboToolbox to record meter installations?

Yes, by building a form with photo, GPS and number fields in its Formbuilder or XLSForm. What its documentation does not list is the installation operation around it: work orders, duplicate serial checks, rejection notes sent to the installer, attendance and counts per installer. PIEBENCH includes those for meter work.

Is KoboToolbox free?

KoboToolbox is free under its Community Plan, run by the nonprofit Kobo, with usage limits on submissions and storage per billing cycle. Paid Professional and Teams plans exist for high-volume work. PIEBENCH has a free trial and paid plans with users included.

Does KoboToolbox work offline?

Yes. KoboCollect, its Android app, collects data offline and sends it when the device connects, and its web forms work offline once cached in the browser. PIEBENCH's Scout app also works offline. Test both with photos in airplane mode before deciding.

Does KoboToolbox have an iPhone app?

KoboCollect works only on Android phones and tablets, according to its documentation. KoboToolbox web forms run in a browser, including on iPhones. PIEBENCH's Scout app is also Android-only.

Which is better for an installation agency?

PIEBENCH, for most agencies. It is built around installation jobs: work orders, a ready template, duplicate serial checks, approvals with notes and daily counts per installer and team. KoboToolbox suits survey work and organisations that want to build their own forms for free.

Can I move KoboToolbox survey data into PIEBENCH?

Yes. Export the survey results and import them into PIEBENCH by CSV as service points, then use them as the starting point for installation work orders. Many teams survey consumers first and install afterwards.

Free trial · no card

See it with your own crew

Start a free trial, or ask us for a walkthrough of your rollout.

Related